Renovation waste has a habit of arriving faster than expected. One day you are lifting a few old tiles, and by the weekend there is a heap of timber, broken units and rubble sitting on the drive. If you plan to book a skip in Bexleyheath, the size you choose decides whether the job runs smoothly or ends with a second booking and an extra bill.
This guide covers the main skip sizes for Bexleyheath projects, which size suits which type of renovation, and what to check before the skip arrives. It is written for homeowners, landlords and small builders working across DA6 and DA7.
Skip Sizes for Bexleyheath at a Glance
Skips are measured in cubic yards, which describes how much space the container holds, not how much it can legally weigh. RMS Skip Hire lists five builder skip sizes, and the table below shows the dimensions and current price ranges.
| Skip size | Height | Length | Width | Price range (excl. VAT) |
| 4 yard | 1.1 m | 2.4 m | 1.5 m | £210 to £230 |
| 6 yard | 1.1 m | 3.3 m | 1.8 m | £260 to £280 |
| 8 yard | 1.2 m | 3.4 m | 1.8 m | £290 to £310 |
| 10 yard | 1.3 m | 3.6 m | 1.8 m | £320 to £340 |
| 12 yard | 1.3 m | 3.4 m | 1.8 m | £350 to £370 |
Prices are shown as ranges, so confirm the exact figure for your address and waste type when you book. If your project looks bigger than a 12 yard skip can handle, ask the team what can be arranged before you decide.
Matching the Skip to Your Renovation
There is no single right answer, because two bathrooms can produce very different amounts of waste. The guide below works as a starting point, and it is worth describing your project to the team before you commit.
Bathroom Refit
A standard bathroom strip-out usually fits into a 4 yard skip. That covers the old suite, tiles, flooring and any boxing in. Tiles and ceramics are heavy, so a small skip filled with them can reach its weight limit sooner than you would expect.
Kitchen Replacement
Old units, worktops, flooring and packaging add up quickly. A 4 yard skip may be enough for a small kitchen, while a 6 yard skip gives more breathing room if you are also removing a partition or replacing the floor. Remember that old ovens, fridges and washing machines count as electrical items, which cannot go in the skip and need separate disposal.
Loft Clearance or Conversion
Lofts hold more than people remember, and a conversion adds timber, insulation and boarding on top of stored belongings. A 6 or 8 yard skip suits most loft jobs. Bulky, light items take up space without adding much weight, so volume is the main concern here.
Extensions, Patios and Heavy Rubble
Bricks, concrete, soil and hardcore are the materials that catch people out. A skip can be full by weight long before it looks full, so a 6 or 8 yard skip is often a safer choice for rubble than the largest one available. If you expect several tonnes of material, speak to the team about how to split it across more than one skip.
Full House Renovation
A whole house refit rarely fits one skip from start to finish. A 10 or 12 yard skip works for the main strip-out, but many projects run better with a skip swap at each stage. That way you are not paying for space you will not use during a quiet week.
Why Weight Matters as Much as Size
This is the point most first-time bookers miss. Every skip has a maximum weight, and heavy waste such as soil, rubble and tiles can reach it while there is still room at the top.
Light waste behaves the other way round. Old furniture, carpet, timber offcuts and packaging fill the space fast but weigh relatively little.
Two practical rules help here:
- For heavy waste, pick a smaller skip and load it evenly rather than a large skip filled with rubble.
- For bulky, light waste, go up a size so you are not forced to leave things out.
If your renovation produces both, keep the heavy material at the bottom and break down large items before they go in.
Check Where the Skip Will Go Before You Book
Size is not only about waste. It also has to fit the space you have. A 12-yard skip is around 3.4 m long and 1.8 m wide, which is a lot of driveway once you allow room for the delivery lorry to manoeuvre.
Before booking, measure the drive and check for:
- Gates, posts or low walls that could block access
- Overhead cables or branches near the drop point
- Parked cars that will still need to get in and out
- Soft ground or drains where the skip will sit
Using the Road and Getting a Permit
If the skip cannot go on your property, it will need to sit on the public road, and that needs a permit from Bexley Council. RMS arranges this on your behalf, so mention early on that the skip will be roadside. Many residential streets in DA6 are narrow and busy with parked cars, which is worth thinking about when you pick a size.
When Space Is Tight
If there is no room for a skip to stay overnight, a wait and load service is an option. The driver waits while you fill the skip, then takes the waste away straight after. It suits small jobs where the waste is ready to go in quickly.
What Can and Cannot Go in the Skip
Most household and renovation waste is accepted. This includes furniture, carpets, wood, metal, plastics, cardboard, garden waste and construction rubble such as bricks, concrete and tiles.
Some items cannot go in. According to RMS, these include asbestos, batteries, electrical items, paint tins, gas bottles and tyres. If you are unsure about something such as plasterboard, ask before loading it, because it can need separate handling.
Keep waste level with the sides of the skip and avoid piling it above the edge. An overloaded skip is unsafe to transport, and it can cause delays on collection day.
Should You Go Bigger or Book Two Skips?
Going up a size feels like the safe choice, but it is not always the cheapest or most practical one. A larger skip costs more, needs more space and can hit its weight limit with heavy waste.
On the other hand, an undersized skip leads to rushed loading, items left behind, and a second delivery. A good middle route is to choose the size that fits your main waste type, then add a second skip only if the project grows.
Splitting a renovation into stages often works well:
- Strip-out waste first, usually bulky and light
- Rubble and heavy materials second, in a smaller skip
- Final clear-out and packaging last
This approach keeps each skip properly filled and makes it easier to separate waste types.
How to Book a Skip in Bexleyheath
Booking a skip in Bexleyheath is quick once you have a few details ready. Just give the RMS Skips team a call, and they will ask for:
- Your postcode and where the skip will be placed
- The type of waste and the rough amount
- Your preferred skip size, or a description of the project so they can advise
- Your preferred skip delivery date
Same-day or next-day delivery is often possible for most sizes, subject to availability. The hire period usually runs for around two weeks, and you can ask for an extension by calling before it ends. An extension may carry a small additional fee.
Once the skip is full, call to arrange collection. If neighbours are likely to add their own rubbish, position the skip on your property where you can, or ask about a lockable lid.
Final Thoughts
The right skip size comes down to three things: how much waste your renovation will produce, how heavy it is, and how much space you have for the skip. Match those three, and you avoid most of the common problems, from overfilled skips to wasted money.
If you are still deciding, tell the team what you are renovating and they can recommend a size before you commit. Call RMS Skip Hire when you are ready to book a skip in Bexleyheath, and they will talk through your project and give you a clear quote.
Leave a comment